Fabric Reinforced Troughs

trough1
Our fabric reinforced elastomeric troughs have been used in a wide variety of state and local bridge projects and can be fabricated to any state specification.

Common stock material includes neoprene and EPDM with nylon reinforcement

Common stock material includes polychloroprene (neoprene) and EPDM with nylon reinforcement.

Stock thicknesses are typically available in 1/8″, 3/16″, and 1/4″ .

Material thickness, including total number of plies is custom fabricated to any length and width with hanger plates, end caps, and downspouts as required.

Typical Material Specifications
Elastomer Properties:
    Durometer
    Tensile strength, min.
    Elongation, min.
    Heat Resistance: 168hrs at 158°F
         Duro change, max.
         Tensile strength change, max.
         Elongation change, max.
    Compression set, max.: 22hrs at 158°F
    Tear strength, min.
    Low temp. brittleness: Method D2137
    Ozone resistance: Method D1149
    50±5
    1500 PSI
    200%

    ±10
    -25%
    -25%
    25%
    ±180lbs/in.
    No cracks
    No cracks
Composite Material Properties:

    Weight, min.
    Tensile strength, min.
    Elongation, min.
    105oz./sqyd.
    700 x 700 lbs/in.
    30%